Category Archives: Uncategorized

How do I maintain my gutters?

gutters along a tile roof

How often should gutters be cleaned?

Those gutters on your home aren’t just for décor purpose. So, when they are broken or malfunctioning, professional gutter system repair is just as important to your home as your plumbing system. As a homeowner, you want to have a routine gutter cleaning and maintenance about the same time you have your HVAC system professional inspected and serviced. On your list of service companies, add a gutter maintenance company too! 

It is surprising how quick a gutter system can get clogged. With only a few leaves, even less pine needles, will form a blockage. If you don’t realize there is a blockage, the water backs up and often pushes up under the shingles, then you have a roof leak. Or, if there is a lot of debris, adding water to this will lead to needing professional gutter system repair or replacement. 

To keep your gutter system clean and flowing, avoiding any misdirection of water and damage, routine basic gutter maintenance and cleaning is essential. How often can be determined by the type of trees you have around your home and in the neighborhood.  So, just how often do you need your gutters cleaned and maintained to avoid gutter system repair, or worse? 

Twice a year will remove any debris like leaves, limbs, and twigs. A good timetable for gutter cleaning is to coincide with any of these homeowner tasks:

  • Smoke detector battery change
  • Outdoor light bulb change
  • Vehicle tire rotation
  • Daylight Savings Time clock resetting 

However, you should have your gutters cleaned after a significant weather event. The high winds can blow in more debris and leaves than normal, and if the storm had hail, you could need gutter system repair. A home with a lot of trees should have a gutter cleaning three to four times a year, especially if those trees are pine trees. 

Can I clean my gutters myself?

If you don’t mind heights and have a ladder, yes, many homeowners do their own gutter cleaning. Keep in mind that a professional contractor will have all the equipment needed for gutter system repair and cleaning. You may need to purchase some items to do your own gutter cleaning. Use the following steps for gutter cleaning: 

  • You’ll need a good extendable ladder, rubber gloves, eye protection, and wear long pants and sleeves.
  • Spread a plastic sheet or tarp where you’re working. 
  • Position the ladder on a flat and sturdy surface.  
  • Using a small plastic shovel or scoop, clean out all the gunk in the gutter runs. This is why you need the sheet or tarp in place, so you can toss the gunk down. 
  • Using a water hose at full blast, flush the gutter runs out toward the downspouts  then flush the downspouts. At this time, you’ll know if you need gutter system repairs or replacement. 
  • After you flushed the gutter system, make any gutter system repairs you’ve found, replacing any hanger or gutter sections as needed. 

Now that you have done this once, you’ll find it easy to do the next time. Or you may decide you have other things to do on your Saturdays and hire a professional contractor next time. 

What is the fastest way to clean gutters?

A fast and straightforward method for gutter cleaning is to climb a ladder, taking a leaf blower with you. Then walk along the roof edge, blowing into the gutter run.  If you’re not fond of heights, you can purchase an extension to your leaf blower and do this from the ground, however, you may not get all the blockages cleared in this matter. 

You can also use a power washer, be careful not to knock the gutter runs off the hooks or you’ll be paying for gutter system repair and gutter cleaning.  Sometimes, a water hose at full blast isn’t strong enough to get the wet leaves and debris out of the gutter runs. Either of these methods will require placing a plastic sheet or tarp in the area where you’re cleaning. 

If the tarp and clean up afterward isn’t appealing, you can clean your gutters with a shop vac and an extension.  This would clean the gutters and keeps the debris in one place where you just empty into a trash bag. 

How do you maintain gutters and downspouts?

Keeping your gutter system clean will keep it functioning and keep you from needing gutter system repairs. A few simple steps is all it takes:

  • Step One – Gutter Inspections: Before  gutter cleaning, inspect to see what gutter system repair may be needed.  Gutter sections with corrosion, holes, split joints, bent or missing hangers. Make these repairs first and then proceed with the cutter cleaning. While you’re cleaning, you may notice more gutter system repairs needed. You can do those after you’re done. 
  • Step Two – Gutter Cleaning: Follow the instructions we provided above. Getting the stuck debris out first then use water, a leaf blower, or a shop vac to clear the debris out. 
  • Step Three – Unclog the Downspout: If the downspouts are clogged, clear gutter runs aren’t going to do much good. Start by removing the elbow and run hard pressure water through the top of the downspout. You can use a plumber snake to get stubborn clogs the water hose doesn’t push out. 

It can’t be repeated and stressed enough the importance of gutter maintenance and repairs. From the roof being damaged to the siding of your home, the foundation, and more, clean gutter that are functioning properly are important to your home. 

white gutter system and soffit

What happens if you don t clean your gutters?

  • Foundation Damage: When water can’t flow through the gutter, is spills over and ponds around the foundation, softening the soil and causing the foundation to crack. 
  • Wood Rot: Overflowing gutters usually means water is trapped behind the gutters too and there it rots the fascia and soffit boards.
  • Roof Leak: Gutters that are cleaned will cause water to back up under the shingles, onto the decking, and then a roof leak appears. 
  • Insects:  Insects love nothing better than moist dark places to create an infestation they call home.
  • Leaky Basement: If the foundation can be ruined, a basement can have leaks! 
  • Damaged Landscape: As the water ponds around the foundation, it is flooding and killing your flowers, plants, and washing away any mulch.

Let’s get started on your gutters needs in Austin, TX. Call (512) 299-6576 for Freetail Roofing today!

Is a Roof Leak an Emergency?

water leak coming through ceiling

When water seeps in

Next to the air conditioner or the water heater needing repair, a roof leak repair would rank as one thing a homeowner doesn’t want. Yet, these are things that happen, all a part of homeownership. Today, we’re going to discuss roof leaks, what causes roof leaks, and what to when you have a roof leak. 

So, starting off with a basic question, what causes roof leaks? There are few factors that cause a roof leak, leading to a roof leak repairs:

  1. Shingles compromised
    Poor workmanship during installation is too often found to be the problem with faulty materials being a problem. More than likely though, a leaking roof is caused by mother nature from hailstorms or high winds. Once a shingle is loosened or blown off, the roof’s integrity is compromised, leading to roof leak repair being needed. 
  2. Roof valleys compromised
    Every roof has valleys where two different slopes meet. A metal flashing is installed there to keep water running of the roof. If that flashing comes loose or is punctured, it allows the shingles under it to become loosened, compromising the roof, and again, a roof leak repair is needed.  
  3. Poor Installation or poor quality materials
    When you have a roof installed, you want the best workmanship possible. Using a contractor that doesn’t have experience or offer recent, local references can result in poor installation. Or a contractor that doesn’t use the best roofing materials possible can result in need roof leak repair.  
  4. Punctured roof or obstruction
    When branches or limbs fall out of trees, or the roof is hit with hail or other objects, it will often cause roof damage. After a significant weather event, it recommended to walk around your home and check or any broken branches and limbs. If you notice any, have a professional roofing contractor inspect your roof and see if there any need for roof leak repair or replacement. This inspection should include check the gutters and valleys too.
  5. Improper Ventilation
    If your attic has improper ventilation, or the rooms in your home aren’t properly ventilated for the HVAC, it can allow moisture to build up and over time, create a leaking ceiling. This may not require roof leak repair, but it warrants having a roofing contractor inspect your attic and roof to make sure. 
  6. Old roof
    The roof on your home will not last forever. The life expectancy of a roof is between 20 and 30 years, depending on the quality of shingles. If your roof is 15 years or older, a professional inspection is recommended. You may need to get a new roof before repeated roof leak repairs start. 

Can roof leaks be fixed?

Yes, most times, a roof leak repair is possible by a professional roofing contractor. As soon as you notice that you have a roof leak, take the steps to stop the leak from damaging your home’s interior anymore. We’re going to  answer the question “How do you fix a leaking roof yourself?” in minute. 

Next, call a professional roofing contractor. They will inspect the roof and your attic, get an assessment of the problem and the discuss the options of roof leak repair or replacement with you. Keep reading for information on what to do when you have leaking roof.

Who do you call for a leaky roof?

When you have a leaking roof, what should you do first? You’ll want to take the steps we outline next to minimize damage, but your first phone call should be to a roofing contractor.  Make this call first and while waiting on the contractor arrive, follow the steps we’ve outlined. Once you have done your part to minimize the damage and the roofing contractor has either completed a roof leak repair or provided you an estimate of what is needed, call your insurance company. 

What to do if your roof is leaking?

Here we offer a step-by-step process to follow for successfully handing your leaking roof: 

  • Step One: Minimize the interior damage: Where the leak is coming into your home, place towels under the area and a bucket or some type of container. Next, if there is a bulging area, poke it with a sharp object and let the water fill the bucket or container. This will relieve any pressure that the built up water is creating. Next, using old towels, and clean up what you can, cover your furniture and other items that can’t be removed from the immediate area with plastic. Pull up carpeting and rugs, place fans around the room, this will prevent mold from starting. 
  • Step Two: The Roofing Contractor: Next, call a local, professional roofing contractor. Hopefully, you have minimal damage to your roof and a roof leak repair is possible then. Otherwise, if a new roof is needed, they will provide you an estimate that you’ll need to share with your homeowner’s insurance company. If a new roof is necessary, the roofing contractor should be able to do a temporary fix to keep the leak from getting worse. 
  • Step Three: Inspect your roof and interior: As you wait for the contractor, go around your home and take pictures of the damage that you can share with your insurance company.  When the contractor arrives, ask them to take pictures while on top of the roof as well.  Inspect the attic too and take pictures if possible.  
  • Step Four: Call the insurance company: If the damage is minimal and the contractor can do a roof leak repair on the spot, there isn’t any need to file a claim on your homeowner’s insurance.  Save these claims for more serious issues that will exceed your deductible. 

Can a roof leak be repaired from the inside?

So you have a leaking roof, and the roofing contractor can’t to you for a few days. If there has been a significant weather event in your area, this isn’t unusual. Here, we are providing you steps for a temporary fix until the roofing contractor can provide you a permanent solution. 

Divert The Water

  1. Create a track for the incoming water to drain by pushing a nail into the hole where the water is coming.
  2. Place a bucket or container, a large size, under the area and tie a string onto the nail and stretch it to the bucket. The water coming in will follow that string to the bucket. 
  3. Once the rain has stopped and the area of the leak has dried, follow the next set of steps. 

Seal The Leak

  1. First, you need to find leak and you can do this by getting in the attic with a flashlight. Shining it around the attic, look for damp, moist areas, and mold. 
  2. Using chalk, draw a circle around the problem area to help identify it when time to make the permanent repair.
  3. Once the area is dry, place a piece of plywood over the hole and apply a roof patch tar product to the area, spreading it around the leak, cover the entire region.
  4. Once that has dried, caulk the edges, using a finger to spread it out.  
damaged tile roof

Can I claim for roof repairs on insurance?, or Does insurance cover a leaking roof?

These are the most common questions a homeowner will ask, and for good reason. You pay monthly premiums, you’d like to get your money’s worth, right? Most insurance policies for homeowners will cover roof replacement when the damage happened from a natural act like hail, wind, etc.  Or if an accident not of your fault, roof replacement maybe covered.  

Every policy is different, and it is to your best interest to review your policy before you need to file a claim.  of nature or sudden accidental event. A roof leak repair or replacement due to age of the roof or negligence will not be covered by any homeowner’s insurance policy.  

Even if the negligence is from the previous owners, the preliminary inspection every insurance company performs before issuing a policy, the adjuster will advise you of repair or replacement needed. If you choose not to do this, any roof leak repair or replacement will be at your expense. Call (512) 299-6576 today for your roof leak repair in Austin, TX.

How Do You Do a Roof Inspection?

shingle roofing system

What is a roof inspection?

A roof inspection is typically a professional in the insurance industry or roofing industry checking the structural condition. There are several reasons roof inspections are performed. 

Building inspectors perform roof inspections on new builds and remodeled buildings. Insurance adjusters do roof inspections before issuing a policy or to validate claims. Roofing contractors do roof inspections for business owners and homeowners that request them. In that situation, they are doing roof inspections and repairs estimates for damage from fire, hail, storms, or wind. These are the roof inspections our article will be based on today. 

What do roof inspectors look for?      

The roofing industry experts recommended annual roof inspections, but most homeowners don’t call for roof inspections until they have a concern (roof leaking) or problems (storm damage). Another purpose of roof inspections is to prepare a house for market. Roof inspectors are trained on How to do a roof inspection for various purposes  because there are different factors to be checked and considered based on the reason for the inspection. The basics of all roof inspections include the following: 

  • Interior: The first area of roof inspection is the interior for any sign of water damage, especially in the attic. Indication that tell them there is possible water damage is moisture and mold or water stains. They will check for day light shining through the roof and the check for  signs of an aging roof.
  • Exterior: The exterior or the roof is the next area for roof inspections. They are looking closely at the shingles and their condition, like bald areas where granules are missing, loose and missing shingles, missing nails, bent or missing flashings, cracked caulk. 
  • Estimate: For a roof contractor doing an inspection, once they have completed the inspection, they will provide the homeowner a report on their findings along with an estimate for repairs or replacement.

What is involved in a roof inspection?

Professional roof inspections vary based on the type of roofing material used. Asphalt shingled roofing inspections include what we discussed above. This is a basic and common process of residential roofing inspections. 

Metal roof inspections are different as they are focused on finding possible leaks and the reason for the leak. The areas that get attention during metal roof inspections include:

  • The seams – Because metal roofs contract and expand with the temperature, the screws often work loose, allowing the seams to separate. This require immediate attention before the underlying roof structure is damaged from condensation and moisture.  
  • The flashing – The flashing is important part of any roof, metal especially for the same reason for seams that have loosen and separated. Additionally,  loose or missing flashing will allow water to get under it and then corrode the metal panel. 
  • The rust – Rust is metal roofing’s enemy because it will eat it, creating holes and water gets through the holes and into the house. Once rust gets into a metal panel, the entire roof requires replacement, making metal roof inspections an absolute must. 

How do you perform a roof inspection?

Here are six steps to follow to perform your own roof inspections.  Because you are not trained on this process, professional roof inspections are valuable even when you don’t find anything. 

  • The Gutters: The gutter system on a home can tell a lot during roof inspections. If they are filled with granules or if they are bent, broke, loose, or missing, they can often indicate problems with the fascia, soffit, or shingles. 
  • The Flashing: If there isn’t flashing in the valley, around the chimney or where roofing angles meet during roofing inspections, it needs to be installed immediately. These are weak areas that water can filtrate under the shingles and into the attic. 
  • Skylights: If your roof is being replaced or refurbished, have the skylights replaced too. Good quality skylights haves a lifespan of 20 years. If the flashing and sealant is missing around them, during normal roof inspections and no new roof is being installed, the flashings should be replaced. 
  • The Stacks: The stacks on top of your roof serve an important purpose of letting exhaust out of the drains so water flows freely. Otherwise, the sewage gas would fill your home.  If the stacks are bent, cracked, or loose, they need to be replaced. 
  • The Chimney: Roof inspections should include checking the chimney and surrounding area. It needs to be accurately assessed for damage like missing mortar, chimney cap, flashing, etc. 
  • The Attic: Close attention during roof inspections should be paid in the attic. Here is where moisture can build up and cause major problems. It needs to be vented yet sealed well. It should have dry insulation and no water stains on the underside of the roof. 

How do you know if you have roof damage?

Warning signs that you may have roof damage that should not be ignored are: 

Water Damage: Roof inspections will check for water stains on the ceilings and walls, typically these are the most noticeable that a homeowner can be aware without roof inspections. 

Shingles: Missing shingles or balding shingles are indication that professional roof inspections are needed for further examination. 

Fascia and Soffit: Deterioration like cracking, decay, missing or rotted wood around these areas are typically from water damage, often from gutter drainage.

Gutter System: As we’ve mentioned earlier, the gutter system will tell professionals during roof inspections there is a problem and as a homeowner, you can use this for a gauge too. 

Poor Ventilation: When looking for possible roof damage, curled shingle edges often indicate the attic has improper venting and cause ice dams in the winter. Aged roofing is also indicated by curled shingles. 

Shingles on garage

How do you check for roof leaks?

Going in the attic is the best way for roof inspections looking for leaks.  Take a flashlight and look for black marks, mildew, mold, moisture, and water stains.  Turning the flashlight off while in attic to see if any daylight is coming through the roof will give you an idea of possible leak locations. 

When should I get roof inspected? As mentioned in the beginning, the roofing industry recommend annual roof inspection as part of homeownership.  You definitely should have a roof inspection done if you find any of the things we’ve mentioned here and if  several of your neighbors are getting a new roof, there is a good chance you need one too. Need a roof inspection in Austin, TX? Call (512) 299-6576 today.

What Are Green Roof Systems?

plants on the rooftop

Learn More About Green Roofs

When it comes to interesting roof designs perhaps the most innovative can be seen with a green roof system. Essentially a green roof will be able to provide a range of vegetation of your choosing while adopting a number of benefits. There are many different types of green roofs with different details that will surround them. It’s best to confer with a certified roofer to see what may be done with your property. Until then, here is some general background information regarding green roofs that may prove useful to you.

Where are green roofs most popular?

Countries that commonly feature a green roof are European ones who have been implementing this type of technology for a long time since the 1960s. Although popular there, major US cities have been increasingly showing initiatives with implementing green roofs as seen with Chicago, Washington D.C., and Portland. This could be due to the fact that on top of the unique draw in design aesthetic a green roof offers many economical as well as environmental benefits.

How long do green roofs last?

A green roof will be able to last from 30-50 years. This type of roof lives longer than standard roofing options due to the fact that it will protect the roof membrane which extends the life of the roof.

What is green roof construction?

A green roof is also known as eco-roofs or vegetative roofs can be placed on a flat or slightly sloped roof. It consists of a layer of vegetation that’s planted over a waterproofing system. It acts as an extension of an existing roof which will then involve a drainage/roof repellent system, filter cloth, a lightweight growing medium, and plants. Green roofing falls into three main categories of semi-intensive, intensive, and extensive.

What is the difference between intensive and extensive green roofs?

The difference between an intensive green roof and an extensive one is that an extensive one will be able to grow a wide range of plants from shrubs to small trees while an extensive green roof can only accommodate a small selection of drought-tolerant plants. These plants will have to have a shallow root system as well.

Do green roofs need maintenance?

An intensive green roof will require maintenance depending on the landscape design and planting scheme. An extensive green roof will only need minimal maintenance to make sure that there aren’t any unwanted species growing.

What are the layers of a green roof?

The layers of a green roof involve vegetation, a growing medium, filter membrane, drainage layer, root repellent/waterproofing layer, a roofing membrane that supports the plants above, thermal insulation, a vapor control layer, and lastly structural roof support. 

How Green Roof Works

A green roof will be able to mitigate water runoff and sewer overflows as it has vegetation and soil that act as sponges that will absorb and filter the water that would normally go down gutters and into sewer systems. Essentially a green roof will be able to remove air particulates, make more oxygen, and give shade to the roof which will cool it down.

How do green roofs save money?

A green roof will be able to save on money due to its ability to reduce the heat fluctuations known with roofs. They will be able to use less energy with heating and cooling which then leads to fewer costs on monthly HVAC bills. During the winter a green roof can also minimize heat loss through the added insulation on the roof. Essentially a green roof will be able to conserve more energy which means that there will be less greenhouse gas emissions as a result.

View of green roof on modern buildings and other residential buildings in Sydney, Australia during sunrise

What are the benefits of having a green roof?

  • Economic Benefits
  • Improves Stormwater Management
  • Reduces Urban Heat Island Effect and Improves Air Quality 
  • Insulates the Building
  • Improves Efficiency of Mechanical Equipment
  • Reduces Greenhouse Gas Emissions
  • Extends Roof Life
  • Provides Urban Amenities

What is the future of green roofs?

Green roofs will be able to reduce energy and remove pollutants and dust in the air. As they are a great way to add to the environment and promote better practices while saving energy and reducing greenhouse gas emissions they may be implemented more and more with other methods of roofing.

Speak to Your Local Roofers Today About Green Roof Construction

A green roof installation will be a great way to provide an attractive look to your roof while producing a number of benefits from energy cost savings to protecting the environment. There are many types of plants and vegetation that you may want to place on your roof. Speaking to a qualified roofing company will be a great way to see what options are available for your project preferences and goals. Only with a professional rofoer will a roof inspection and all necessary measures be taken to comply with proper roof specifications and details. Get started with a green roof today and enjoy a colorful and unique roof for years to come.

If you’re interested in a green roof in Austin, TX call (512) 299-6576 with Freetail Roofing!

Is roof flashing necessary?

flashing along a chimney

Flashing for your roof

To understand if roof flashing is necessary, let’s describe what is roof flashing. Roof flashing is a thin strip of metal that is installed around protrusions of the roof like chimneys, dormers, skylights, vents, and where roof changes meet. The purpose of roof flashing installation is to redirect water from these critical areas. 

Roof flashing material is typically a thin galvanized metal. Depending on the roofing material, the architectural style of the house, and the customer’s budget, roof flashing also come in aluminum, copper, lead, stainless steel, and zinc alloy for a home that an architectural metal with a coating is more appropriate. 

Among those metals are architectural metal roof flashings are metals with a coating such as anodized aluminum, galvanized steel, lead-coated copper, terne-coated copper, galvalume, and metals akin to stone-coated metal. 

What are the different types of roof flashing?

Now that you know the types of metal that roof flashing comes in, let’s talk about the different types of flashing and their purpose: 

  • Apron or Continuous: Apron or continuous flashing is a long piece of metal that takes water to the shingles below it, which is why it is often referred to as apron flashing. It isn’t a flexible piece of metal, so as a roof contracts and expands, this piece of metal sometimes needs replacing.  
  • Base: A roof with features like a chimney, requires two pieces of flashing. This strip of flashing ensures that rain meets the flashing surface and directs it down. Installation around the chimney can be challenging, and when the roof contracts and expands, it can cause it to come loose.  
  • Counter: This flashing is installed above or opposite to base flashing, to complete the base flashing. 
  • Step: This is a rectangular piece with a 90 degrees angle in the center and is used at the wall. There are multiple pieces in the layers of shingles to ensure water is directed down and away from the wall. 
  • Skylight: Some brands of skylights come with the flashing to fit the product. If the skylight is already installed, a professional roofing contractor can install it separately. 
  • Valley: A valley is where two roof angles meet, and the metal roof flashing ensures the water is redirected. 
  • Drip Edges: The drip edge roof flashing is a thin metal that redirects the water off the roof so that it doesn’t damage the house. 
  • Kickout: This roof flashing creates a bridge between where gutter and step flashing meet. 

Does flashing go over or under shingles?

Water is a roof’s enemy, regardless of the structure’s age. Yet this is the one component of a house that is neglected. Roof flashing is installed on top of shingles. Some area, it is layered with the shingles, using step flashing. 

Do roofers replace flashing?

Yes, roof flashing is part of the roofing and is installed by the roofer. If you’re needing replacement roof flashing, a general contractor with roofing experience can replace bent, damage, and missing roof flashing. 

What does flashing on a roof look like?

A professional roofing contractor that has the experience, they will install the roofing in a way where it blends in with the roofing material. It will be installed so that most of it will not be visible from the street, and what is visible is slight.

protective flashing around metal roof

How do you fix roof flashing?

Some roof leaks are where the metal roof flashing is (or isn’t) along the edges, in the valleys, and along junctions around chimneys, dormers, vent pipes, etc. Because a roof contracts and expands with the weather and roof flashing doesn’t, corroded spots or small holes can form that need to be repaired. First, with sandpaper or a wire brush, roughen around the hole then clean it off. Cut a patch larger than the area you’re repairing. Next, apply roofing cement to cover the patch. Corroded or damaged flashing will need to be replaced, which requires removing some of the shingles, some of the mortar, and the damaged flashing. A professional roofing contractor best does this. 

We can’t stress roof flashing importance enough. Roof flashing is a critical part of the roof. Roof flashing secures roof joints, areas around the chimney, dormers, and valleys. Roof flashing sends water to the gutters, and the gutters send the water away from the foundation. Without adequate roof flashing, water will find those vulnerable areas like the chimney and dormers, and along the edges without drip edge flashings. Water will find its way down inside the attics and the walls.  Roof flashing is as essential as the asphalt shingle or any roofing material you choose to install on your home. When you get quotes for a new roof, the roof flashing should be one line item and, if not, question this. You do not want them using existing roof flashing with your new roof. Let’s get started on your roof flashing in Austin, TX. Call (512) 299-6576 today.

What is a Cool Roof System?

The roof of the house is made of galvanized metal profile against the sky

Find Out About Cool Roofs

When it comes to your roofing system, proper protection and conditions should be maintained. With all of the many innovations available with roofing, a cool roof is one many choose to have due to their energy efficiency and protection from the damaging effects of the sun. Make sure to get in touch with a professional roofing company to see what type of cool roof system can be implemented for the betterment of your property. Until then, here is some general background information regarding cool roofs that may give you an idea of how they work. 

What is a cool roof?

A cool roof is a system of roofing that provides higher solar reflectance which means it can reflect the sun’s visible, ultraviolet (UV,) and infrared wavelengths. A cool roof is designed to have higher thermal emittance which means it can radiate absorbed or non-reflected solar energy. Durability and longevity of the roof will also be enhanced. Finally, it can also reduce both the urban heat island effect as well as building cooling loads. 

What is a cool roof made of?

A cool roof can be made from a number of roofing materials, highly reflective paint or sheet coverings. Materials can range from metal, slate and more while cool roof coatings can match with sloped and flat roofs. 

What is the most energy efficient roofing material?

The roofing materials with the highest energy efficiency and cool roof abilities are considered to be green roofs, metal roofing, slate or clay (with roof coatings,) sprayed polyurethane foam (SPF), and thermoplastic olefin/polyolefin (TPO).

How do I keep my roof cool?

You may be able to make efforts of having a cool roof by painting your roof white or incorporating a roof garden. Adding white paint can have higher reflectance while a roof garden (otherwise known as a green roof) will shade the roof from direct sunlight while the soil absorbs the heat. You may install solar panels, which will capture the sun’s energy and instead convert it into electricity. 

What is cool roof paint?

Cool roof coatings are typically white or have special reflective pigments that will be able to reflect the light like UV rays They are thick in consistency and some may offer restorative features, chemical and water protection. Roof coatings are made to work with a number of different roofing materials so depending on the type of roof that you have there will be a roof coating that will match it.

Does cool roof paint work?

Cool roof coatings or paint will be able to elongate a roof’s life by 10 years and can be reapplied until the roof reaches the end of it’s natural life expectancy.

What color roof is the coolest?

Standard cool roof designs are historically lighter in color yet certain roofing products allow for darker hues to have qualified levels of solar reflectivity. In general, with any roofing material, light colors are better at reflecting heat while darker surfaces absorb heat more. According to the Berkeley Lab, a dark gray roof can reflect solar heat at about 20% while white colors can reflect it about 55%.

What is a good solar reflectance index?

A solar reflective index (SRI) will measure a roof’s ability to reject solar heat. A good measurement as seen with a standard white roof will have a reflectance of 0.80 and an emittance of 0.90 which will give it a score of 100. A black standard roof in comparison will only have a reflectance of 0.05 with an emittance of 0.90 which gives it a final score of 0.

standing seam metal roof

What are the benefits of a cool roof?

  • Lower local air temperatures (otherwise referred to as the urban heat island effect.)
  • Lower peak electricity demand, which can assist in preventing power outages.
  • Reduce power plant emissions, including sulfur dioxide, mercury, carbon dioxide, and nitrous oxides by reducing cooling energy use in buildings.

Is a cool roof worth it?

A cool roof may be able to have tax credits depending on the brand of roofing material. You’ll be able to save on cooling costs by as much as 20%. There is a strong value in having a cool roof overall as it will protect  your roof from premature wear caused by sun damage which saves on repairs and replacements.

Contact Your Local Roofing Company 

A cool roof is a great way to incorporate protection into your roofing system. You’ll ensure a longer roof life, lower building temperatures, and save on HVAC costs. See what type of cool roof implementation will work best with your property with the help of a qualified roofer. Based on your roofing specifications, materials, and goals they will be able to best recommend the right cool roof solution for you. 

If you’re interested in a cool roof in Austin, TX call (512) 299-6576 with Freetail Roofing!

What do you do if you have hail damage on your roof?

hail damage

Should I Claim Hail Damage on my Roof?

Homeowners of Georgetown, TX are well aware of hail damage and the recent example is no different. Freetail Roofing is here to help, having experience in hail damage and offering the service roof hail damage repair to take care of your roof after such an occasion. Some may then ask what the right course of action is after a hail storm. We suggest taking the route of:

  • Examine your roof for damages like dings, cracks, or other markings
  • Get an inspection from your local roofer
  • File an insurance claim
  • Have us repair your roof

While you may not immediately see hail damage on your roof, a roof inspection is still capable of finding even the most minor of damages that can lead to larger problems like leaks. Freetail Roofing offers these to each community we service, including the Sun City Texas Community. So when you call us out, we’ll detail everything we find and help you with the insurance claim so you can have an easier way of getting your roof repaired. With that said, hail in Georgetown, TX and the surrounding areas does not have to be an issue when you contact us for repairs. To schedule an appointment, call (512) 299-6576 today to speak with one of our representatives about hail damage on your roof and they will arrange an appointment for your home.

How do you know if your roof has hail damage?

When it comes to hail damage, homeowners can make the mistake of putting off the damages. Freetail Roofing recommends heavily against that due to a few reasons that tend to work against the property owner over time. Those that live in Georgetown, TX understand the need for the quick action and the necessity of starting the process immediately upon finding damages after a hail storm. 

The immediate reason for that is a lot of the time, especially if you do not take a good look at your roof after a hail storm, you will not be aware of hail damage until it is too late. This is because almost all roofs are designed to resist hail storms and other severe weather. So while the immediate hail is negated, there is still a risk of a leak through a cracked shingle, dented metal, or other damage. A leak can come from something as minor as unsealing a shingle or a small crack that simply creates a small opening. In either case, the damage may not be noticeable from the ground level, but over time will create an opening for water damage. 

In the case of filing an insurance claim, insurance companies are more likely to accept a claim that is filed promptly. Generally within one year of the determination that the damages were caused outside of the homeowner’s control. This is because most insurance policies do not accept claims including damages that accrue over time and happened due to negligence.

Can new roofs get hail damage?

Unfortunately, when it comes to hail damage a new roof can be affected just like an old roof. Especially when hail is as large or larger than one inch in diameter, homeowners will likely see damages regardless of whether their roof is old or new. While damages are possible at a smaller size like quarter size, it is not as noticeable. Freetail Roofing suggests not taking any chances either way, especially after a hail storm. Because while there may not seem to be any damages on the ground level, a roof inspection can go a long way in preventing expensive repairs. 

When hail damage does occur, Freetail Roofing is the roofing company that can be there for your home in Georgetown, TX and the surrounding areas. As a roofing company, we understand the importance of hail damage roof repair and apply it professionally for each property we serve like the Sun City Retirement Community.

hail damage

Should I replace roof after hail damage?

Roof replacements tend to be reserved for outstanding damages and at the end of a roof’s working lifespan. You will notice when you need a roof replacement upon events that transpire like:

  • Constant and expensive repairs
  • Your neighbors are getting roof replacements
  • Leaks occur periodically in your roof
  • Shingles are losing granules and bending upwards

Particularly after a hailstorm, Freetail Roofing recommends getting a roof inspection and hail damage roof repair. If we notice the need for a roof replacement, we will inform you and advise on the what is the best course of action to take. Whether it’s an asphalt shingle roof or a metal roof, the most common repair in places like Georgetown, TX tends to be storm or hail damage roof repair. While a metal roof is the toughest for homeowners, it is still subject to damages from hail. 

As always, after a hailstorm, we recommend using our hail damage roof repair service when you notice damages on your roof. Freetail Roofing is ready to help homeowners in Georgetown, TX and the surrounding areas keep their roofs repaired with our fantastic services. Call (512) 299-6576 today to schedule your appointment and have our roofers come out to your home for repairs.

Does Roof Coating Stop Leaks?

What is the Best Roof Coating?

There are a number of excellent roof coatings available on the market. But which one is right for your climate and your roof specifications? Please review the following list that briefly reviews some of your possible roof coating choices.

  • Acrylic roof coating. If you live in an environment that has a high level of ultraviolet rays, it is important for you to consider an acrylic roof coating. Acrylic roof coatings can be sold in different colors, but they usually come in the colors white, tan, and grey.
  • Silicone roof coating. Like acrylic roof coatings, these coatings perform exceptionally well in areas of the country with high levels of ultraviolet rays. When rain is a daily occurrence, silicone roof coating are preferable due to its ability to handle ponding water.
  • Asphalt roof coating. Asphalt coatings can be emulsions or solvent-based “cut-backs.” These coatings can be either black or aluminized.
  • Polyurethane roof coating. Urethanes are recognized to have excellent mechanical properties and high abrasion resistance. For roofs that experience high levels of foot traffic, polyurethane roof coatings are optimal.
roof coating

Is Roof Coating Any Good?

If you require Commercial roof coatings and restorations it is important for you to select the right roofing company and the right kind of roof coating. And yet the question remains: are roof coatings any good? If you are a property owner on a budget, one of the best options you can choose for your low or flat-slope roof is a roof coating. Roof coatings act as a barrier to harmful UV rays and can limit expansion and contraction cycles that can negatively impact a low-slope roof. Roof coatings are water-resistant, but in areas of the country where water is a prominent feature of the weather, a silicone roof coating will be optimal.

Does Roof Coating Stop Leaks?

While it is true that coatings can stop minor leaks, the roof should be properly repaired and dried before any roof coatings are applied. As a matter of fact, as part of a proper roof coating installation, the roof must be thoroughly cleaned. After all dirt and debris are cleaned from the roof, the holes and cracked in the roof can be repaired. After that procedure has commenced, the roof coating installation can occur. With proper repairs and roof maintenance, commercial property owners can see their roof coating last a long time before their next roof replacement.

Should I Seal My Roof?

Are you wondering whether or not you should seal your roof? The answer is fairly straightforward. Sealing a roof will potentially help prevent leaks and keep water from the underlayment of your roof. If you have a metal roof it will need to be sealed every two to three years in order to remain in good condition. Sealing a roof is considered a pre-emptive measure that is easier than installing metal shingles or asphalt shingles.

How Long Does Roof Sealant Last?

The most important part of any roof installation is the skill level. If you have a skilled and experienced roofing company that is utilizing the proper tools, methods and materials, you can expect your roof installation to last longer than most. Typically, roof coatings last approximately ten years. As previously mentioned, with an exceptional roof coating installation, your roof longevity can be extended.

Will Elastomeric Roof Coating Stop Leaks

In a proper and thoroughly applied elastomeric roof coating installation, commercial property owners can rest satisfied that their roof coating will perform well against roof leaks. These roof coatings are specially designed to stop leaks for different roof applications. Whether a property owner has a metal, layered asphalt, single-ply membrane, or different kind of roofing material, an elastomeric roof coating will perform exceptionally well.

What is Silicone Roof Coating

Silicone roof coatings perform well in areas of the country where water is a natural part of the prevailing weather patterns. In addition, silicone roof coatings can be applied to practically any existing roof surface. Once applied, silicone roof coatings create a seamless membrane that will protect the roof from normal roof concerns such as severe weather an ultraviolet light.

What is Acrylic Roof Coating

Acrylic roof coatings are a liquid-applied, seamless roof coating that is formed in situ on the roof. In normal circumstances, acrylic roof coatings are applied five to ten times thicker than house paint.

roof coating

What is Cool Roof Coating

Cool roof coatings are an exceptional choice for commercial property owners that live in hot or arid climates. These roof coatings are white or have special reflective pigments that reflect sunlight. Cool roof coatings are available for most roof types.

If you think you need architectural shingles installation in Austin, TX, call Freetail Roofing at (512) 299-6576 to speak with our staff about making an appointment today!

How Long Do Asphalt Shingles Last?

asphalt shingle roof

How Long Do Asphalt Shingles Last?

Asphalt shingle roofing is an extremely popular and versatile form of roofing. But how long do asphalt shingles last? According to modern-day estimates, asphalt shingles last approximately twenty years. With regular roof maintenance, your roof can last as long as thirty years. At the end of the day, there are several factors to consider when it comes to roof longevity. The first factor is the quality of the roof material. The nicer the roof material, the more durability it will possess. The second factor to consider is the quality of the roof installation. If a professional roofing company has installed your roof, it will last longer than if an unskilled laborer performed the installation. 

What Type of Roof Shingles is Best?

Are you wondering what different types of roof shingles are available on the market? Please review the following bullet points to learn more.

  • 3 tab asphalt shingles. These shingles are fairly affordable and can cost anywhere between five and twelve thousand dollars for installation. These will last twenty years or more.
  • Architectural shingles. These particular shingles are a little more expensive than their counterparts, ranging from twelve to fifteen dollars per installation. Correspondingly, they also last a little longer – 30 years, as a matter of fact.
  • Metal roof shingles. These shingles range from five thousand to twenty-eight thousand dollars depending on the cost of living in the area, and the materials. Metal shingles only need to be replaced once a lifetime, averaging out at 80 years for approximate life-span.

What is the Difference Between Architectural Shingles and Asphalt Shingles?

While architectural shingles and asphalt shingles are made of similar materials, they do have slight differences. The primary difference between these two styles of roofing material is size and shape. Three-tab shingles are made of one size and shape, while architectural shingles are dimensional or laminate, and come in many sizes and shapes. Architectural shingles are also thicker and have a dimensional appearance. These shingles are often compared to shake shingles. Three-tab shingles also weigh less and are about fifty percent heavier than asphalt three-tab shingles.

Are Asphalt Shingles Toxic?

Older versions of asphalt shingles can indeed be very toxic. Asphalt shingles that were made before 1989 contained asbestos. Asbestos is thankfully classified as a carcinogen due to its toxicity and ability to create cancer in individuals around the material. Asbestos is now classified as a toxic material.

What Do You Do With Old Shingles?

Are you wondering what to do with your old asphalt shingles? There are a number of ways you can dispose of them. For instance, you can recycle them by looking up different recycling resources. You can also donate them to a worthy cause. You can also make art with old shingles, or create a mat for a workspace. The possibilities are endless. It is also important to handle your roofing materials with gloves and appropriate safety gear. Safety is of maximum importance.

What are Asphalt Shingles Made Of

Asphalt shingles are made of a base mat or organic material known as cellulose. It is also made of inorganic material, namely glass fibers. In order to make asphalt shingles, the organic mat is saturated and coated with asphalt and then surfaced with ceramic-coated opaque mineral granules.

Can Asphalt Roof Shingles Be Painted

While it is true that asphalt shingles can be painted with the proper material, and according to the manufacturer’s instructions, if you are looking for a new look for your roof, please consider a re-roof. If it is necessary to move forward with painting asphalt shingles, a high-quality 100% acrylic latex paint with a flat finish is recommended. A fresh coat of this paint should be applied periodically.

When Were Asphalt Roof Shingles Invented

Asphalt roof shingles were invented in 1903. They are an American invention. Henry Renolds of Grand Rapids, Michigan was the inventor. Asphalt shingles were first used in 1903, and by 1911 they came into general use in some parts of the United States. By 1939, asphalt roofing shingles were being produced and marketed nationwide. Today, asphalt roof shingles are considered to be the most popular and affordable type of roofing material on the market.

asphalt shingle roof

Replace Asphalt Shingle Roof

Is your asphalt shingle roof in desperate need of repairs? If you have a roof leak and other similar issues, it may be time to seriously consider an asphalt roof replacement. A professional roofing company will be able to give you the answers you need to make the necessary changes to your roofing structure. The integrity of your home is the most important objective for any professional roofer.

You need an asphalt shingle roof in Austin, TX, that consistently delivers proven results. Call Freetail Roofing at (512) 299-6576 to speak with our staff about making an appointment today!

What is the Best Metal Roofing Structure?

standing seam metal roof panels

Updating Your Residential Space

Have you been considering replacing or updating your residential roof? If so, then you are more than likely aware of just how many options there are for you to choose from. What many may not be aware of is the fact that metal has become a popular choice for residential properties. That’s right, more and more homeowners are choosing a standing seam metal roof for their Austin, TX properties. For more information about this roofing structure, contact Freetail Roofing today at (512) 299-6576

under a standing seam metal roof

Benefits of a Standing Seam Metal Roof

Similar to a corrugated metal roof on a commercial building, a standing seam is known as a hidden fastener roof. That’s because the fasteners, the way the roof ultimately comes together, are hidden by overlapping barriers. This gives the whole structure more support and durability. A standing seam metal roof installation is a great investment for those that want something that is quite literally going to last a lifetime. 

  • Variety: Metal paneling comes in a variety of shades and textures for you to pick from. You can truly customize the exterior of your home to fit exactly the vision that you have.
  • Sustainability: In general, metal roofing is made from aluminum which can be anywhere from 25-95% post-consumer metal. Not only are you utilizing recycled materials, but metal roofing can be installed over other materials resulting in less waste overall.
  • Durability: A metal roof will be significantly more durable in comparison to a shingle roof. It can withstand constant sun exposure, wind, rain, and even relatively small sizes of hail. It’s also resistant to fire making it a great investment for dry areas. 
  • Longevity: There is no doubt about it, a metal roof will last longer than a shingle roof. Most shingle roofs have a lifespan of about 25 years before they need to be replaced. A metal roof, however, has a lifespan double that. Most will last upwards of 50 years or longer!
  • Versatility: Depending on your home and your needs, a metal roof can be installed directly over your existing structure. This allows you a great deal of versatility because you can decide on something that will truly benefit you. 

There is a variety of standing seam metal roof types and materials to choose from. More often than not, aluminum or steel is chosen because they are durable, flexible, and reliable. To learn more about a standing seam metal roofing installation or just more about your options regarding roofing, contact Freetail Roofing. We can help you with all kinds of roofing needs, including installing a standing seam metal roof for homes in the area. Contact us today to learn more.

Standing Seam Metal Roof vs Asphalt Shingles

The major deterrent for a metal roof of any kind, including a standing seam roof, is the price. A standing seam metal roof costs more than most asphalt shingle installations. It’s true, the initial costs for a metal roof are often more than even something like central heating repair, but the overall savings that you can experience are more than shingle roofing. A metal roof will help you save on energy bills as well as help save you money on repairs and replacement services. Which is the better choice? That’s ultimately up to you, but when compared with each other, metal proves time and time again to be a reliable roofing structure. 

Frequently Asked Questions

  • What is the average cost of a standing seam metal roof?
    • For a complete roof installation, you are looking at about $23,000 to $30,000 for a standing seam metal roof. Now, the cost is going to vary based on the size of your home, if it’s a single or double story and more. On average, though, this is about what homeowners spent on a metal roof.
  • How long do standing seam metal roofs last?
    • On average, metal roofing of any kind has been known to last 50 years or longer. Most metal manufacturing companies offer 50-year warranties on the sheet panels so you’ll always have coverage for repair or replacement services. 
  • What is the difference between standing seam vs corrugated metal roofs?
    • The ultimate difference between the two is the appearance. Corrugated metal roofing is often used and associated with commercial buildings. It really does look like large overlapping rectangles. Whereas a standing seam roof has a bit more of a refined or finished appearance. 
  • Is standing seam roof worth the money? 
    • That answer will ultimately be up to you. That in mind, while a metal roof will be more expensive initially, it will last significantly longer than a shingle roof. Additionally, if it’s installed properly, it will require less maintenance or repair services. All of which will end up saving you money in the long run. 
  • What are the problems with metal roofs? 
    • Most of the problems with a metal roof come down to the installation. If improperly installed, your roof will likely leak, become damaged, and more. But the same is true with any other roofing structure.
completed standing seam metal roof

Schedule a Consultation With Our Team Today

Connect with Freetail Roofing at (512) 299-6576 about a standing seam metal roof for Austin, TX houses today. We are here to help you.